1.Fixed the lamp bracket to the mounting position, as shown figure
2.Connect the input wire to the wire connector, as shown figure2;
3.Adjust the lamp Angle to the right position:
a. Screw off the butterfly nut, remove the bolt, then the u-bracket
will rotate easily.
b. Adjust the light projection direction to the suitable position.
c. Pass the bolts through the u-bracket hole and dial hole at the
same time and tighten the butterfly nut so that the u-bracket does
not loosen, as shown figure 3;
If there need to adjust the projection direction of a single
module, please follow these steps:
a. Remove (1) screw with a cross screwdriver;
b. Loosen the (2) screw with a hex wrench;
c. Rotate the module to the right position, Module Angle adjustment
range: -30°~30°;
d. Tighten the (1) screw and (2) screw, as shown figure 4.
e. After checking, power on.
QC
GYLED has very strict Quality Control System, from checking and
evaluation of incoming materials to the delivery of products, each
item will be checked and tested for several times.
Shipment
1. DHL(a big discount)
2. TNT/FedEx/UPS
3. DHL Airway express. About 3-5days you can get them by the door
of your home or office.
4. Seaway.15-25 days. It will definitely save your shipping cost
for the large order.
FAQ
Q1 What is your terms of payment?
T/T 30% as deposit in advance,and 70% balance before the shipment,
We'll show you the photos of the products and packages before you
pay the balance.
Q2 Can I get sample order first?
Yes.Welcome sample order to test quality.
Q3 Is your enterprise a factory or trading company?
We are the manufacturer specializing in R&D.
Q4 What kind of products are you specializing in?
We focus on LED street light,LED flood light,LED highbay light,LED
explosive proof light and so on.
Q5 All LED light have a warranty?
Yes.All kinds of products at least 3 years warranty.
Q6 What about the packing for bulk order?
If bulk order's quantity reach the custom MOQ,we can provide you
the custom service.
